FAQ

HyFive - Safety Seat
  • How to remove the headrest!

    Anyone who has ever tried to wash the child seat cover often encounters the same problem, how do I get the headrest off. Everything else is pretty intuitive up to that point. In order to get the headrest off the seat in one piece and including the belt, there is a trick that I will now explain to you. You have this black plastic loop on the back of the seat at the end of the headrest strap and a Velcro fastener on the opposite side. This can be used to fasten the headrest or remove the headrest.

    But now step by step: First open the Velcro and pull the lower strap out of the plastic loop, then turn the plastic loop 90° and press/pull it through the blue PRESS button at the top. then in the same way under the TT bar to the front through the cover. And the headrest is already off and the cover can be removed from the seat. The advantage of this method is that the belt is still in the back of the headrest. I wish you success!

    Headrest_Belt_1 Hadrest_Belt_2 Headrest_Belt_3 Headrest_Belt_4

    And now do it all in reverse order.

    Headrest_Belt_4 Headrest_Belt_3 Hadrest_Belt_2 Headrest_Belt_1

  • How much air does the HyFive need?

    The HyFive and the HyFiveOneTT always come with an automatic pump. Pumps for older models such as Hy5, Hy5TT or Hy5TT 2020 require a little more pressure and these pumps should not be used with the newer models. The automatic shutdown would trigger a little later. So in principle it is possible, but we do not recommend it. Conversely, a new pump on an older model would switch off too early, which is why this is only possible to a limited extent and not recommended.

    Caution! If the seat is inflated with a pump other than the one supplied or with a compressor, please ensure that the batteries in the HyFive function 100% and that the sensor or indicator LED next to the valve briefly lights up blue and then flashes red. If it lights up continuously red, the batteries are empty. If the LED switches off, too much time has passed and the indicator must be reactivated.

    The pressure in the seat should not be built up too quickly and the seat should be able to unfold slowly. You should also take short breaks to read the indicator. The pressure in the system can be evenly distributed up to the sensor and an accurate measurement can be carried out. In the case of a compressor with a pressure gauge for car or truck tires, you should pay particular attention to the fact that the display is extremely imprecise in the range of up to 1 bar. You shouldn’t rely on that under any circumstances!

    The indicator in the seat and the visual feedback via the LED button are always relevant. The operating pressure in the HyFive is 0.60-0.85 bar, most of the pressure gauges on the market are too imprecise for that. The LED should therefore at least flash blue or light up blue, whereby such a high pressure is only necessary if you are using the seat continuously and do not want to inflate it every week. For short trips (approx. 1-2 days) it is sufficient if the LED flashes blue. This saves you a lot of time and the pump a lot of energy.

    Good ride!

  • Is nachfolger a sustainable brand?

    At Nachfolger we want to leave a green and positive carbon footprint behind, that will impact our planet and all that are living on it. We take sustainability very seriously and that is why we are focusing on things that really matter, from using high quality materials in our products to striving for sustainable steps in our product’s life cycle: from transport, to the diverse possibilities of using our child seat, to recycling. Our aim is to reduce our carbon footprint as much as possible so that our future “Nachfolgers” can also enjoy the beauty of our planet.

    Our product’s lifecycle includes: Transport, Carpooling, Recycling. In our videos we explain you how nachfolger is sustainable with these three aspects. 

  • How can I solve issues when inflating the nachfolger seat?

    In case you are experiencing an issue with the pump, e.g. the pump stops working every three seconds, the pump stops and the seat is not fully inflated or that the pump cannot inflate the seat 2 times. Then we advice you to press the connector firmly onto the valve (until air escapes when refilling) and then flip the lever while pushing. You can also hear and see this procedure on the video.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

     

  • How long can I leave the HyFive in the car?

    The air lasts about two weeks when inflated, maybe shorter at the beginning, but when you have pumped up more often, the material settles more and more and it lasts longer.

  • Can my child sleep in the seat

     Of course, our child seats are so comfortable that your child will happily fall asleep inside while driving.

  • Up to what height and weight can nachfolger seats be used?

    You should make sure that the top tether belt is always two fingers wide from the head. Otherwise, the seat is designed for up to 18kg (approx. 105cm), which always includes clothing and shoes. From 15kg or 1 meter you can switch to the next category.

  • How does the HY5.1 differ from the HY5TT2020?
    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

  • Is the child seat suitable for rental cars / carpooling?

    Yes, nachfolger child seats are perfect for rental cars and carpooling. The seat can be inflated and dismantled in no time and can be easily transported in the carry bag. The seat protector keeps the car seat of the rental car clean.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

  • How do I know that I have properly belted the child car seat?

    The HyFive must be fixed with the vehicle belt, the lap belt must be properly tensioned and hold the seat well. The HyFive must also be attached to the back seat via the top tether and a small distance to the front seat must be maintained.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

  • How can I charge the pump?

    USB is a worldwide standard. Any mobile phone charger, a Laptop or Power banks with a USB port can charge the pump. It is important that the charging power that is stored there is higher than 1 Amp h, otherwise the charger will not start, switch off too early or it will simply take a long time to charge the batteries in the pump.

    If the pump is empty and it may not charge properly, it was maybe dis-charged for a longer period of time. Then you can try to wake up the pump when you unplug and plug the usb. The batterie needs lots of power to wake up and this pulse comes from the USB port disconnection and reconnection. If you have a 12V car plug, this is also a strong source of power. With a 12V car plug you can test if the batteries are empty or the pump is broken. The pump runs directly on the 12V car plug cable even if the batteries are empty. If the pump runs with the 12V car plug the pump is ok. Wake it up, then charge it once with the 12V cable, pump up the seat twice and then you can try to charge with the normal USB charger.

    Batteries need power, therefore we recommend to do not store them dis-charged, about 40-60% is ideal. So after the seat was inflated once, you mirght be exactly at this value and then the batteies in the pump will last for years.

    Have a save journey.

  • The pump turns off automatically?

    The pump has a safety mechanism that automatically switches off the pump at approx. 0.9 bar (approx. 13 psi). It is important that the connection between the pump and valve sits very well and that the lever on the connector has been turned over and fixed. If the connection is not tight enough, too much pressure is built up in front of the valve and the pump switches off significantly earlier. As a result, the pump has to press against a very high resistance and that requires a lot of energy and time.

    In a nutshell, this means: If the pump is not connected correctly, it will take longer, the pump needs more energy and the seat will not be fully inflated in the end. Here you will find a video on which you can see how the pump is correctly connected to the seat.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

Installation
  • How can I repair the hose connector?

    When your hose connector is broken you can easily put it back together. In the video we show you how you can fix your hose connector so that the pump for your nachfolger child car seat works again: 

  • Can I install the HyFive on the front passenger seat?

     Yes, the child seat can also be attached to the front of the front passenger seat, but only on a fully-fledged vehicle seat with a three-point belt system that is approved for one adult. The vehicle seat must face in the direction of travel. The top tether is not necessary on the front passenger seat, its function is taken over by the dashboard. Please drive the HY5 as close as possible to the dashboard and deactivate the airbag. Don’t forget: The HY5 is mounted against the direction of travel.

    In the video you can see that the HyFiveOneTT- City is installed on the passenger seat.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

  • How many child car seats fit in the back seat?

    Every vehicle seat on which a HyFive child seat may be mounted must have a three-point automatic belt and be aligned in the direction of travel. The HY5 is only 44cm wide, so in most cases it should also be possible to mount three seats in the second row. 

  • The pump turns off automatically?

    The pump has a safety mechanism that automatically switches off the pump at approx. 0.9 bar (approx. 13 psi). It is important that the connection between the pump and valve sits very well and that the lever on the connector has been turned over and fixed. If the connection is not tight enough, too much pressure is built up in front of the valve and the pump switches off significantly earlier. As a result, the pump has to press against a very high resistance and that requires a lot of energy and time.

    In a nutshell, this means: If the pump is not connected correctly, it will take longer, the pump needs more energy and the seat will not be fully inflated in the end. Here you will find a video on which you can see how the pump is correctly connected to the seat.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

Safety
  • How much air does the HyFive need?

    The HyFive and the HyFiveOneTT always come with an automatic pump. Pumps for older models such as Hy5, Hy5TT or Hy5TT 2020 require a little more pressure and these pumps should not be used with the newer models. The automatic shutdown would trigger a little later. So in principle it is possible, but we do not recommend it. Conversely, a new pump on an older model would switch off too early, which is why this is only possible to a limited extent and not recommended.

    Caution! If the seat is inflated with a pump other than the one supplied or with a compressor, please ensure that the batteries in the HyFive function 100% and that the sensor or indicator LED next to the valve briefly lights up blue and then flashes red. If it lights up continuously red, the batteries are empty. If the LED switches off, too much time has passed and the indicator must be reactivated.

    The pressure in the seat should not be built up too quickly and the seat should be able to unfold slowly. You should also take short breaks to read the indicator. The pressure in the system can be evenly distributed up to the sensor and an accurate measurement can be carried out. In the case of a compressor with a pressure gauge for car or truck tires, you should pay particular attention to the fact that the display is extremely imprecise in the range of up to 1 bar. You shouldn’t rely on that under any circumstances!

    The indicator in the seat and the visual feedback via the LED button are always relevant. The operating pressure in the HyFive is 0.60-0.85 bar, most of the pressure gauges on the market are too imprecise for that. The LED should therefore at least flash blue or light up blue, whereby such a high pressure is only necessary if you are using the seat continuously and do not want to inflate it every week. For short trips (approx. 1-2 days) it is sufficient if the LED flashes blue. This saves you a lot of time and the pump a lot of energy.

    Good ride!

  • Why is the HyFive rear-facing?

    A rear-facing child car seat has been proven to be the safest way to transport a child. In the case of a conventional, forward-facing child car seat, the child’s head is torn forward in the event of a collision and loads the child’s neck. While with a reboarder these forces are significantly reduced and the energy is distributed over the entire back of the child. This means that the reboarder reduces the load by over 80% under the same circumstances.

    .

  • Do I have a quality and service warranty on the seat?

    We guarantee that we will help you at any time if something is wrong with your HyFive. A quick and uncomplicated repair or exchange should give you the secure feeling that we are happy to take responsibility. And even more important: If no insurance company replaces your seat in the event of an accident, we are here for you. We will exchange your seat so that your child can continue to travel safely. Please note that the child seat is no longer fully functional after an accident and must not be used under any circumstances.

  • Can the child seat still be used after an accident?

    Thanks to the flexible structure, a crash at up to 10 km / h must not affect the seat at all. However, every accident is different, sliding into the field at 30 km / h is okay, but 10 km / h into the bridge pillar is too hard. That’s why we check and test these seats here in Vienna so that you can continue to travel safely.

     

     

  • Are there any pollutants in the child seat cover?

    The covers that have been tested by Siftung Warentest have been converted for over 18 months

     

    The covers that have been tested by the Stiftung Warentest have been discarded or converted for over 18 months. So there are only covers that are completely free of pollutants, provided they buy directly from us. However, there is a possibility that you will still occasionally find seats of the first generation. These should generally be washed once before use. In our web shop, however, there are only pollutant-free covers.
  • The pump turns off automatically?

    The pump has a safety mechanism that automatically switches off the pump at approx. 0.9 bar (approx. 13 psi). It is important that the connection between the pump and valve sits very well and that the lever on the connector has been turned over and fixed. If the connection is not tight enough, too much pressure is built up in front of the valve and the pump switches off significantly earlier. As a result, the pump has to press against a very high resistance and that requires a lot of energy and time.

    In a nutshell, this means: If the pump is not connected correctly, it will take longer, the pump needs more energy and the seat will not be fully inflated in the end. Here you will find a video on which you can see how the pump is correctly connected to the seat.

    YouTube

    By loading the video, you agree to YouTube's privacy policy.
    Learn more

    Load video

Travel
  • How much air does the HyFive need?

    The HyFive and the HyFiveOneTT always come with an automatic pump. Pumps for older models such as Hy5, Hy5TT or Hy5TT 2020 require a little more pressure and these pumps should not be used with the newer models. The automatic shutdown would trigger a little later. So in principle it is possible, but we do not recommend it. Conversely, a new pump on an older model would switch off too early, which is why this is only possible to a limited extent and not recommended.

    Caution! If the seat is inflated with a pump other than the one supplied or with a compressor, please ensure that the batteries in the HyFive function 100% and that the sensor or indicator LED next to the valve briefly lights up blue and then flashes red. If it lights up continuously red, the batteries are empty. If the LED switches off, too much time has passed and the indicator must be reactivated.

    The pressure in the seat should not be built up too quickly and the seat should be able to unfold slowly. You should also take short breaks to read the indicator. The pressure in the system can be evenly distributed up to the sensor and an accurate measurement can be carried out. In the case of a compressor with a pressure gauge for car or truck tires, you should pay particular attention to the fact that the display is extremely imprecise in the range of up to 1 bar. You shouldn’t rely on that under any circumstances!

    The indicator in the seat and the visual feedback via the LED button are always relevant. The operating pressure in the HyFive is 0.60-0.85 bar, most of the pressure gauges on the market are too imprecise for that. The LED should therefore at least flash blue or light up blue, whereby such a high pressure is only necessary if you are using the seat continuously and do not want to inflate it every week. For short trips (approx. 1-2 days) it is sufficient if the LED flashes blue. This saves you a lot of time and the pump a lot of energy.

    Good ride!

  • Is the pump or inflated seat sensitive to heat?

    The seat and the material have been tested for heat resistance and can withstand a temperature change test of up to 70 degrees. This corresponds roughly to the temperature that it occasionally has in the car when the car is in the blazing sun. The pressure does not rise so much that it would be critical for the seat, there is a 4-fold overpressure safety.

    Nevertheless, we recommend covering the seat always, as direct sun can then become even hotter at certain points and damages from the heat are possible. The advantage of our seat is that it cools down quickly when you open the doors because it has 2/3 less mass than a normal seat in this category and we have ventilation holes in the backrest.

    The seat does not always have to be fully inflated. As soon as the LED flashes blue or lights up blue, the seat is safe. Which saves time and battery in the pump. For safety reasons, the pump is switches off automatically at 0.9bar (13psi) in order to protect the material of the seat and the pump.

  • Can the seat be used on an airplane?

    Yes, we have aircraft certification for the entire HY5TT (also 2020) series, the Hy5.1TT and the HyFive WORLD and CITY series. Please note that you must be demonstrably able to assemble the seat and regularly read the pressure in the seat. That is why we have recommended the Travel Kit + in the past. But that was imprecise, difficult to handle and again a part that can easily be lost. The more practical recommendation today is therefore to take the reading with the mobile phone. Everyone has it with them and can be used as a mirror (selfie from the back of the seat). But every one to two hours is enough.

    The reading of the pressure indicator (short press on the small LED display on the seat) must in principle take place before take-off and landing. The LED of the ACS on the seat must never flash red or light up red. The 3 x AAA batteries in the seat must be new or have been proven to be able to last the entire flight. Before starting, we recommend only inflating the seat until it flashes blue and then switching the pump off manually. During the flight, the pressure in the cabin drops slightly. The pressure in the seat then increases very slightly. Depending on the flight altitude by up to 0.2 bar. None of this is a problem for the HyFive. With older models of the HY5TT, however, it may start to flash red quickly and signal overpressure. Then the pressure has risen to just over 1 bar. Therefore, it is better to take off with a little less air and then pump up again before landing.

    In general, it is always important to inform the airline before you travel if you want to take your child car seat with you. On board, the crew and the captain always make the final decision. The cabin crew must always be obeyed, even if this means that, for example, you are not allowed to use your HyFive. Please always take this into account when traveling by air. The HyFive is so compact and can then at least stay by your side as hand luggage.

    We wish you a good and, above all, safe flight.

  • Can I take the pump on an airplane?

     Our pump has an output power of 6.6 Wh. We have developed it so that you can safely take it with you in your hand luggage.

No questions matching current filter
What Our Clients Say
12 reviews